this is the trick how you can format your mobile at your home no need to pay any one fully free trick just download this software from link given in the post..
This simple project shows you how to make a USB powered Nokia cell phone charger. The advantage is that it weighs much less than the bulky AC adaptor, and can be used wherever you have a computer or a laptop. I use this thing all the time now!
What do I mean by “safe charger”? Honestly I’m not sure. I’m just going on what I was able to infer from what I read off my multimeter. What I found was that the voltage across the nokia charge pins was rapidly fluctuating from Vdd to about 4 volts above Vdd. It would not do to have ~9 volts injected into a 5 volt bus! Thankfully, all you need to do is stick a diode in there and that’s that. So the diode might not be needed, but it’s safe! Thus, “Safe Charger”.
So far, it charges my phone just fine, but slightly slower than the wall wart that came with it. I think so, anyway. It’s hard to do any real comparison because I sacrificed my only nokia wall wart to make this charger. I live dangerously!
DISCLAIMEROID STATEMENTEY THING: Ok, so here’s the deal: You can really mess things up with this project! If you are not COMPLETELY confident in your abilities, just go and spend the $6 on a ready-made one of these doodads. They are available all over the internet. This project is for people with loads of useless cables lying around and 20 extra minutes to kill. Don’t blow out your expensive computer just to save a few bucks!
Step one: strip off the shielding and insulation on an inch or so of the usb cable. Clip the white and green cables to uneven lengths so they can’t conduct into each other or either of the power lines. Hopefully you should be left with a black wire and a red wire.
Step two: Clip off a length of the nokia chargers phone-side plug. You won’t be needing the wall wart part anymore. Strip off the insulation from the nokia plug wire. Hopefully you should have a red wire and a black one. the red wire should be connected to the inner barrel of the plug, and the black one should be connected to the outer barrel.
Step three: Attach a normal silicon diode (not a zener diode) with the line part towards the nokia plug. It should go between the red wires from both cables. Attach the black wires from each cable together.
I suggest staggering the lengths of the wires so that the solder joints have less chance of coming into contact.
Check all the wires with a multimeter to make sure they are really the right ones! The colors might not be standard...
Computer networking is a great way to collaborate with other computer users in your home or office. While it is becoming increasingly easy for the basic computer user, it can still be a difficult, frustrating experience for many people.
Before You Get Started
A boxed wireless router Understand the difference between town-wide wireless broadband (IEEE 802.16/WiMAX/Mobile broadband) and a home wireless network (IEEE 802.11). This article deals only with the latter, generally known as WiFi (which requires no subscription, no roof aerial, no roof mounted dish). Wireless routers are variously known as gateways, access points, transmitters, hubs and switches. They are generally external and will be known as routers for this article. Wireless adapters are also known as modems or receivers and can be internal or external.
Steps
1
If buying router and adapter separately, ensure your wireless router is at least as new as your wireless adapter so that they use compatible standards (known as 802.11a, 802.11b, 802.11g and 802.11n). For maximum compatibility choose Tri-mode or dual-mode 802.11b/g standards.
2
If you are not using Windows XP, check that drivers are available for the chipset of the wireless adapter for your operating system before you buy.
Set up your new router
1
If you want to share a broadband connection via a wireless router, plug the new wireless router into your internet connection point (filter/splitter if ADSL, directly into phone socket if DSL)
2
If you have one, turn on your broadband connection and existing external modem FIRST (wait for all lights to return to normal).
3
Plug your router into your PC with an ethernet cable
4
Turn on your new wireless router SECOND (wait for it to start up fully).
5
Go to your internet browser and type http://192.168.0.1 (Belkin), http://192.168.1.1 (Linksys), http://192.168.2.1 (Others) and enter your username and password for your router (often this is "admin" for username and "admin" or "password" for password)
6
Enable wireless capability (SSID) and enter your username and password given to you by your internet service provider.
7
Choose WPA (or WEP if your card cannot handle WPA) security and enter a passkey and write it down.
Detecting your wireless adapter
1
Note the manufacturer and model of your wireless adapter then plug it into your PC.
2
If your operating system does not recognise the wireless adapter then get drivers from any discs that came with the adapter or, failing that, from the internet.
3
In Windows XP, either right click on the .inf file and click install, or enter Device Manager and Update Drivers on the Unknown Device.
4
Once Windows XP recognises your wireless device it should appear in Network Connections and offer you a choice of routers to connect to within range.
Connecting to a network
1
Choose your router (usually the manufacturer name aka SSID), the security method and enter the passkey in order to connect to it. Use Auto DHCP unless otherwise instructed.
2
This should find the wireless router (click refresh until it does) and connect to the network through the new router.
Google is most popular search engine. We all use google daily. Google has solution for every problem, just type your problem and click search it will give lots of answers. Even searching convert into googling, nowaday everyone does googling not searching. You can also do fun with googles here are some google fun tricks: Do you ever think that why google's name is google?
Disclaimer :
1. This article is for education purpose only.
2. I don’t being held responsible to anything can cause damage to your mobile phone. Try it on your own risk.
3. What you have done here can void your nokia warranty.
If you okay with that disclaimer above let continue. This article well tested on XP SP2 and my Nokia N73.
Q & A :
Q : Why upgrade to the latest firmware needed ?
A : Because the latest firmware can solve a lot of bugs such as slow messaging, slow opening gallery, RAM issue, etc
Q : I have Nokia phone that still in warranty why must i follow your tutorial while i can upgrade in Nokia Center ?
A : You’re right. You don’t need this one. Please go to Nokia Center to upgrade your firmware free of charge.
Q : Why offline ? You can use online update with nokia software updater (NSU).
A : Thats because i have a bad internet connection.
If download offline firmware from rapidshare failed i just re-download again and again,
BUT if download online update through NSU failed then your phone DEAD.
Q : I have N70 or N73 or another N-series. I want to upgrade to Music Edition or Internet Edition with the latest firmware. Is that possible ?
A : Yes. This is what i have done. Just follow this article.
Q : I pay a visit to blue-nokia(dot)com and my phone is not listed. Do i need to upgrade ?
A : You’re using old-fashion mobile phone (no offence lol). Then you can read the rest of this article but you won’t need upgrade your phone.
Q : If flashing failed and my phone dead what should i do ?
A : Then you should read more careful my article. No i’m kidding, no worry about that.
You can flashing dead phone too.
Tools and Requirment :
1. Modern PC spec with XP installed
2. Nokia USB cable
3. Phoenix 2008 or later http://rs635tl4.rapidshare.com/files/239297039/Phoenix_2009.12_v2.exe (143 MB)
4. Offline firmware for your Nokia type. Size vary 40 – 100 MB.
*. Check your current firmware by pressing *#0000# in your mobile phone. Write down in notepad
*. Visit .
*. Choose your Nokia type.
*. Choose your latest firmware with region on your country.
As you can see in image my N73 has 2 latest firmware 4.0839.42.2.1 v11 (Music Edition) APAC and EMEA.
APAC stand for Asia and Pasific.
EMEA stand for Europe Middle East and Africa.
I live in Indonesia so i choose APAC version.
Preparation :
1. In your PC :
*. Create restore point through Start -> All Programs -> Accessories -> System Tools -> System Restore. Name it ‘Before flashing’ click create.
*. Remove Nokia PC Suite, Nokia Software Updater, Nokia Care Suite, Nokia Modem Drivers, Nokia Connectivity Drivers through Control Panel -> Add/Remove Programs, but DO NOT REMOVE PC Connectivity Solution and Windows – Nokia Modem.
*. Restart your PC.
*. Do not connect your phone before installing Phoenix software.
*. Disable all antivirus, firewall, antispyware, antimalware etc.
*. Disable screen saver.
*. Check C:Program filesNokiaPhoenixProducts If you have those folder in there delete all.
2. In your mobile phone :
*. Backup all your mobile phone content since all your data will be lost after flashing.
*. If you protect your memory card with password, then remove it.
*. Remove your memory card from your mobile phone.
*. Go to Tools -> Settings -> Security -> Phone and SIM.
Set Pin code request to Off.
Set Autolock period to None.
Set Lock code to default password which is 12345.
Set Lock if SIM changed to No.
*. Uninstall your mobile antivirus.
*. Charge your phone battery to at least 70% and keep charging. Although flashing takes only 7-10 minutes.
How To Upgrade Nokia Firmware By Offline Flashing
Begin Flashing :
1. Installing Phoenix Service Software 2008 or later :
*. First Extract the archive you have downloaded which contains Phoenix Service Software 2008 or later
*. Install the software. Be patient, it may take some minutes to install all the components.
*. Don’t run Phoenix software now.
*. Connect your Nokia handset to your pc with USB cable in PC Suite mode.
*. windows will start installing the connectivity drivers as soon as you connect the phone. Let it install completely.
If this process failed then you must be remove PC Connectivity Solution. But don’t worry we created restore point earlier remember. Restore your system and start remove Nokia component again but do not remove PC ConnectivitySolution.
2. Installing Firmware Files From The Offline Package You Downloaded :
*. If your firmware file is in .rar format, first extract it using WinRar on desktop.
*. On desktop you will find .exe file of your firmware file.
*. Install the exe file. Do not change its path. It will install it to default location of C:Program filesNokiaPhoenixProducts
*. If you have downloaded a firmware File which Doesn’t have an autosetup, then just copy your Extracted folder Manually in the directory C:Program filesNokiaPhoenixProducts
*. Be sure you install updated firmware. You cannot downgrade your phone’s firmware in BB5 phones which includes all new Nokia phones including N-Series.
*. Phoenix allows downgrading but your phone doesn’t allow it as your phone has some special security built into it. So no use of trying it. You’ll get an error message.
3. Flashing Procedure (Updating to latest firmware version) :
*. Open Phoenix Service Software.
*. Connect your phone in PC Suite Mode.
*. In Phoenix, click File -> Manage Connections.
*. Now click New.
*. Now select the type of cable you are using. If you are using DKE-2, CA-53 [N-Series] cable, select USB.
*. Click Next. It will find your product and say FOUND. If it doesn’t find any, you can try changing your cable type by clicking Back.
*. Click Next and then Finish.
*. Now your cable type (USB) appears in the connection list. Select it. Click APPLY and then CLOSE.
*. Now select File -> Open Product.
*. A list of RM code will open. Select your phone’s RM code. Like RM-133 for Nokia N73 or RM-84 for Nokia N70 and other nokias with there corresponding Rm Types but choose the one which corresponds to your phone! Click OK. At this steps if you receive an error its okay. Just ignore it.
*. Now select File -> Scan Product.
*. Your phone’s firmware info will appear at the extreme bottom of the Phoenix window.
*. Now go to Flashing -> Firmware Update.
*. A window will open.
*. On that window click Browse button (the one with three dots)
*. A window will open with various products and various regions. Choose the region or country of your choice according to the language pack you want to install.
*. Click Ok.
*. Click Refurbish.
*. Now your actual flashing has started. Don’t touch your phone or press any button until the flashing has finished. Also don’t touch your data cable and your computer system. Remember dont Touch!
*. At the end Phoenix will tell you to remove your phone as the flashing has finished.
*. Now wait for your phone to reboot into latest firmware.
*. The flashing procedure takes 7-10 minutes
4. Flashing dead phones [Which show only white screen on startup] :
Note : You can install any firmware in dead phones whether it is latest and or the old one.
Note (Again) : You can make a deadphone if you want. Just unplug your cable while flashing.
*. The procedure is the same for flashing Dead phones.
*. Start Phoenix. Connect your phone with USB Cable (phone is off at this time).
*. Click File -> Open Product. Select your RM code from the window that appears. Click OK.
*. Click File -> Manage Connections. Select No Connection. Then APPLY and CLOSE.
*. Now straight away click Flashing -> Firmware Update.
*. A window will open. Click on Browse button [the one with 3 dots].
*. A window will open with various products and various regions. Choose the region or country of your choice according to the language pack you want to install.
*. Check the option “Dead Phone USB Flashing”.
*. Click Refurbish.
*. Flashing has started.
*. After some seconds flashing will pause asking you to turn your phone ON.
*. Press POWER button of your phone until backlight comes up. Remember not to remove your cable or even remove it accidently will switching on your phone!!
*. Flashing will proceed.
*. Your phone will automatically start when the flashing finishes. After finish you can safely remove your data cable from Phone. FINISHED!!!
5. If you want to install another update to your phone after some months, first remove the previous version you installed in C:Program filesNokiaPhoenixProducts
Delete all the contents of Products folder before installing a new firmware.
PS :
Please leave a comment and do me some favor to keep this blog alive (you know what i mean). Leave a comment with format
Type : N73
Firmware before flashing : 3.0638.0.0.1 30-10-2006 RM-133
Firmware after flashing : 4.0812.4.2.1 21-03-2008 RM-133
Status : Success / Failed (If failed why. Describe where area you failed such as Requirment or Preparation or Begin Flashing and describe the detail.)
Description : Success flashing N73 become N73 ME
There is another Nokia Software that you can use to upgrade your Nokia Firmware called Nokia Care Suite
View Photos
Phone
Nokia 5230
Manufacturer
Nokia
Status
Available
Available in India
Yes
Price (Indian Rupees)
Avg Current Market Price:Rs. 7156
Last Updated On:January 5 2011
Place : Chennai Delhi Kolkata Mumbai
Price (USD)
$147.24 approx
Description
Nokia 5230 is one among the newly launched handsets by nokia and is somewhat a cheaper version of nokia 5800 xpressmusic. It has a colorful touch screen with bright optimised display for media, photos, videos, movies and browsing on the 3.2'' inch widescreen.
Manufacturer Nokia
Status Available
Available in India Yes
Price (Indian Rupees)
Avg Current Market Price:Rs. 4047
Last Updated On:January 5 2011
Place : Chennai Delhi Kolkata Mumbai
Price (USD)
$83.27 approx
Description
This phone similar to the 2700 classic looks like the low-cost version of the 6700 and 6702 classic. Its the cheapest 3G phone from Nokia. With 3G data networks coming slowly to the developing countries, the phone is a great low-cost option.
Hi friends!!!!!!!!!!
This blog is hosted and edited by 4 authors, out of which one is administrator and 3 are authors. All the authors belongs to the field of technology and they like to know about cool gadgets and new technology and they are sharing their knowledge with you people.A new author has joined as today on 09/06/2011 to increase our knowledge base now you will get much benefits of this blog.
